 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NEC's 1.8 V L, S-BAND UPG2006TB SPDT SWITCH FEATURES * LOW INSERTION LOSS: LINS = 0.3 dB TYP. @ Vcont = 1.8 V/0 V, f = 1 GHz LINS = 0.45 dB TYP. @ Vcont = 1.8 V/0 V, f = 2.5 GHz * HIGH ISOLATION: ISL = 29 dB TYP. @ Vcont = 1.8 V/0 V, f = 2 GHz ISL = 25 dB TYP. @ Vcont = 1.8 V/0 V, f = 2.5 GHz * 6-PIN SUPER MINIMOLD PACKAGE: (2.0 X 1.25 X 0.9MM) DESCRIPTION NEC's UPG2006TB is a L, S-band SPDT (Single Pole Double Throw) switch for digital cellular or cordless telephone applications. The device can operate from 500 MHz to 2.5 GHz, with low insertion loss and high isolation with 1.8 V control voltage. APPLICATIONS * L, S-band digital cellular or cordless telephones * BluetoothTM , W-LAN and WLL * Short Range Wireless ORDERING INFORMATION Part Number UPG2006TB-E3 Package 6-pin super minimold Marking G2J Supplying Form * Embossed tape 8 mm wide * Pin 1, 2, 3 face the perforation side of the tape * Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPG2006TB Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. California Eastern Laboratories UPG2006TB PIN CONNECTIONS (Top View) 3 2 1 4 5 6 4 5 6 (Bottom View) Pin No. Pin Name OUT1 GND OUT2 Vcont2 IN VDD1 3 2 1 1 2 3 4 5 6 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Control Voltage 1, 2 Input Power (Vcont = 1.8 V) Total Power Dissipation Operating Ambient Temperature Storage Temperature Symbol Vcont1, 2 Pin Ptot TA Tstg Ratings -6.0 to +6.0 Note Unit V dBm W C C G2J +23 0.15 -45 to +85 -55 to +150 Note |Vcont1-Vcont2| 6.0 V RECOMMENDED OPERATING RANGE (TA = 25C) Parameter Control Voltage (High) Control Voltage (Low) Symbol Vcont(H) Vcont(L) MIN. +1.6 -0.2 TYP. +1.8 0 MAX. +5.3 +0.2 Unit V V UPG2006TB ELECTRICAL CHARACTERISTICS (TA = +25C, Vcont1 = 1.8 V, Vcont2 = 0 V or Vcont1 = 0 V, Vcont2 = 1.8 V, ZO = 50 , Off chip DC blocking capacitors value; 51 pF, unless otherwise specified) Parameter Insertion Loss Symbol LINS Test Conditions f = 0.1 to 1.0 GHz Note1 f = to 2.0 GHz f = to 2.5 GHz Isolation ISL f = 0.1 to 2.0 GHz Note1 f = to 2.5 GHz Input Return Loss RLin f = 0.1 to 1.0 GHz Note1 f = to 2.5 GHz Output Return Loss RLout f = 0.1 to 1.0 GHz Note1 f = to 2.5 GHz Input Power at 1 dB Compression Point Note2 Input Power at 0.1 dB Compression Point Switching Speed Control Current Note2 MIN. - - - 25 20 13 16 13 16 17 22 - - - TYP. 0.30 0.40 0.45 29 25 - 21 - 21 20 25 18 23 50 0.5 MAX. 0.55 0.60 0.65 - - - - - - - - - - 200 10 Unit dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm ns A Pin(1 dB) f = 2.0 GHz, Vcont = 1.8 V/0 V f = 2.0 GHz, Vcont = 2.8 V/0 V Pin(0.1 dB) f = 2.0 GHz, Vcont = 1.8 V/0 V f = 2.0 GHz, Vcont = 2.8 V/0 V tSW Icont Vcont = 1.8 V/0 V, RF Non - Notes 1. Off chip DC blocking capacitors at frequency range of 0.1 to 0.5 GHz 1,000 pF 2. Pin(1 dB) or Pin(0.1 dB) is the input power level when the insertion loss increase 1 dB or 0.1 more than that of linear range. All other characteristics are measured in linear range. Cautions 1. It is necessary to use DC blocking capacitors for No.1 (OUT1), No.3 (OUT2) and No.5 (IN). The value of DC blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with the actual board of the system. The range of recommended DC blocking capacitor value is less than 100 pF. 2. The distance between the GND pin and ground pattern of the substrate should be as short as possible to reduce parasitic parameters. UPG2006TB EVALUATION CIRCUIT (Vcont1 = 1.8 V, Vcont2 = 0 V or Vcont2 = 0 V, Vcont1 = 1.8 V, off chip DC blocking capacitors value C1 = 51 pF, C2 = 1 000 pF (Bypass), using NEC standard evaluation board) C2 Vcont1 6 1 C1 OUT1 G2J IN C1 Vcont2 C2 5 2 4 3 C1 OUT2 EVALUATION BOARD Vcont1 OUT1 C2 IN C1 C2 G2J C1 C1 OUT2 6p SMM SPDT SW Vcont2 TRUTH TABLE Vcont1 Low High Vcont2 High Low IN-OUT1 ON OFF IN-OUT2 OFF ON UPG2006TB TYPICAL CHARACTERISTICS (Vcont1/2 = 0 V/1.8 V, Pin = 0 dBm, OUT2 side is 50 termination) INPUT RETURN LOSS vs. FREQUENCY CH1 S11 log MAG 10 dB/ REF 0 dB 1:-26.287 dB 1.0 GHz 2: -30.675 dB 1.5 GHz 3: -34.567 dB 2.0 GHz 4: -27.974 dB 2.5 GHz 5: -21.341 dB 3.0 GHz CH1 S21 ISOLATION vs. FREQUENCY log MAG 10 dB/ REF 0 dB 1: -27.744 dB 1.0 GHz 2: -28.781 dB 1.5 GHz 3: -29.32 dB 2.0 GHz 4: -26.277 dB 2.5 GHz 5: -22.797 dB 3.0 GHz Input Return Loss RLin (dB) Isolation ISL (dB) 0 0 -0 1 5 2 3 START 0.500 000 000 GHz STOP 3.500 000 000 GHz -20 1 2 3 4 5 -40 4 -40 START 0.500 000 000 GHz STOP 3.500 000 000 GHz Frequency f (GHz) Frequency f (GHz) INSERTION LOSS vs. FREQUENCY CH1 S21 log MAG 1 dB/ REF 0 dB 1: -0.538 dB 1.0 GHz 2: -0.646 dB 1.5 GHz 3: -0.768 dB 2.0 GHz 4: -0.899 dB 2.5 GHz 5: -1.136 dB 3.0 GHz OUTPUT RETURN LOSS vs. FREQUENCY CH1 S22 log MAG 10 dB/ REF 0 dB 1: -25.904 dB 1.0 GHz 2: -30.703 dB 1.5 GHz 3: -31.201 dB 2.0 GHz 4: -28.75 dB 2.5 GHz 5: -20.829 dB 3.0 GHz 0 1 2 3 4 Output Return Loss RLout (dB) Insertion Loss LINS (dB) 0 -2.0 5 n20 1 5 2 START 0.500 000 000 GHz -4.0 START 0.500 000 000 GHz STOP 3.500 000 000 GHz n40 3 4 STOP 3.500 000 000 GHz Frequency f (GHz) Frequency f (GHz) EVALUATION BOARD LOSS vs. FREQUENCY CH1 S21 log MAG 0.5 dB/ REF 0 dB 1: -0.236 dB 1.0 GHz 2: -0.321 dB 1.5 GHz 3: -0.420 dB 2.0 GHz 4: -0.511 dB 2.5 GHz 5: -0.593 dB 3.0 GHz Evaluation Board Loss (dB) 0 1 2 3 -1.0 4 5 -2.0 START 0.500 000 000 GHz STOP 3.500 000 000 GHz Frequency f (GHz) Caution These characteristics values include the losses of the NEC evaluation board. Remark The graphs indicate nominal characteristics. UPG2006TB TYPICAL CHARACTERISTICS (Vcont1/2 = 0 V/1.8 V, Pin = 0 dBm, OUT2 side is 50 termination) INPUT RETURN LOSS vs. FREQUENCY 0 Input Return Loss RLin (dB) -10 Isolation ISL (dB) -20 -30 -40 -50 -60 0 TA = -45C TA = +25C TA = +85C 2.0 2.5 3.0 0 -10 -20 -30 -40 -50 -60 0 ISOLATION vs. FREQUENCY 0.5 1.0 1.5 0.5 1.0 1.5 TA = -45C TA = +25C TA = +85C 2.0 2.5 3.0 Frequency f (GHz) Frequency f (GHz) INSERTION LOSS vs. FREQUENCY 0 -0.1 Insertion Loss LINS (dB) -0.2 -0.3 -0.4 -0.5 -0.6 0 TA = -45C TA = +25C TA = +85C 2.0 2.5 3.0 Output Return Loss RLout (dB) OUTPUT RETURN LOSS vs. FREQUENCY 0 -10 -20 -30 -40 -50 -60 0 TA = -45C TA = +25C TA = +85C 2.0 2.5 3.0 0.5 1.0 1.5 0.5 1.0 1.5 Frequency f (GHz) Frequency f (GHz) Caution These characteristics values include the losses of the NEC evaluation board. Remark The graphs indicate nominal characteristics. UPG2006TB TYPICAL CHARACTERISTICS (f = 2 GHz, Vcont1/2 = 0 V/1.8 V, OUT2 side is 50 termination) TEMPERATURE CHARACTERISTICS OF INPUT/OUTPUT 0 -10 -20 -30 -40 -50 -60 0 TA = -45C TA = +25C TA = +85C 20 25 30 Output Power Pout (dBm) 5 10 15 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. TYPICAL CHARACTERISTICS (f = 2 GHz, TA = +25C, OUT2 side is 50 termination) RELATION BETWEEN CONTROL VOLTAGE OF INPUT/OUTPUT 35 30 Output Power Pout (dBm) 25 20 15 10 5 0 5 10 15 20 Vcont = 1.6 V Vcont = 1.8 V Vcont = 2.8 V Vcont = 5.3 V 25 30 35 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. UPG2006TB TYPICAL CHARACTERISTICS (f = 2 GHz, TA = +25C, Vcont1/2 = 0 V/1.8 V, OUT2 side is 50 termination) RELATION BETWEEN CONTROL VOLTAGE OF 2nd HARMONICS 0 20 2nd Harmonics (dBc) 3rd Harmonics (dBc) 40 60 80 100 120 0 Vcont = 1.8 V Vcont = 2.8 V 5 10 15 20 25 30 0 20 40 60 80 100 120 0 RELATION BETWEEN CONTROL VOLTAGE OF 3rd HARMONICS Vcont = 1.8 V Vcont = 2.8 V 5 10 15 20 25 30 Input Power Pin (dBm) Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. UPG2006TB PACKAGE DIMENSIONS 6-PIN SUPER MINIMOLD (UNIT: mm) 2.10.1 1.250.1 2.00.2 1.3 0.65 0.65 0.1 MIN. 0.90.1 0.7 0 to 0.1 0.15+0.1 -0.05 0.2+0.1 -0.05 UPG2006TB RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (package surface temperature) Time at temperature of 200C or higher Preheating time at 120 to 150C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (molten solder temperature) Time at peak temperature : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 215C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less Condition Symbol IR260 VPS VP215 Wave Soldering WS260 Preheating temperature (package surface temperature) : 120C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Partial Heating Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 350C or below : 3 seconds or less : 0.2%(Wt.) or below HS350 Caution Do not use different soldering methods together (except for partial heating). Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 03/08/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd. |
Price & Availability of UPG2006TB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |